DESK TRIM SERIES
DESK TRIM 65/80/100
Rotary blade in hardened steel.Reference set-square.
0,6 mm max cutting thickness
![Brochure Neolt Factory [STAMPA - ENG]Desk Trim Starter 1400 - NAEP](https://naeponline.com/wp-content/uploads/Brochure-Neolt-Factory-STAMPA-ENGDesk-Trim.jpg)
DESK TRIM PLUS 100/130/150
Square sliding bar.
Reference set-square.
Options:
Tubular support with adjustable feet and collecting fabric
basket (only for mod 130 – 150).
0,6 mm max cutting thickness
![Brochure Neolt Factory [STAMPA - ENG]Desk Trim Plus Starter 1400 - NAEP](https://naeponline.com/wp-content/uploads/Brochure-Neolt-Factory-STAMPA-ENGDesk-Trim-Plus.jpg)
STANDARD INCLUSIONS
Steel working plane
Blade holder carriage sliding on bearings.
Rotary blade in hardened steel.
Metallic parts varnished with epoxydic powder.
MANUAL TRIM SERIES
TRIM 100/130/150/200/250
Options:
Roll-holder and lamp over cutting area.
Max cutting thickness of 0.4mm
Steel working plane
Blade holder carriage sliding on bearings.
Rotary blade in hardened steel.
Metallic parts varnished with epoxydic powder.
The working plane is an epoxydic powder, with a serigraphy
grid to ease the cutting in different formats and
reference set-square.

MANUAL TRIM PLUS 130/150/200/250
Max cutting thickness of 1.6mm
Two reference squares.
Stand and retrieval tray for trimmings.
Steel working plane
Blade holder carriage sliding on bearings.
Rotary blade in hardened steel.
Metallic parts varnished with epoxydic powder.
The working plane is an epoxydic powder, with a serigraphy
grid to ease the cutting in different formats and
reference set-square.

POWER TRIM PLUS 105/145/165/210/250
Options:
Roll-holder and lamp over cutting area
Max cutting thickness of 2.2mm
Fixed blade in painted stainless steel, mounted
on a reinforced cutting plane.
Stand and retrieval tray for trimmings included
Complete with movable guide.

STRONG TRIM PRO 130/180/230
Provided with movable reference square.
Options:
roll holder lamp over the cutting area and sheet holder
Max cutting thickness of 4.5mm
Fixed blade in painted stainless steel mounted
on a reinforced cutting plane.
Stand with paper collecting tray.

ELECTRO TRIM SERIES
ELECTRO TRIM 100/130/150/200/250
Max cutting thickness of 0.6mm
STANDARD INCLUSIONS
Steel working plane t holder made of transparent plastic
The working plane is an epoxydic powder, with a serigraphy
grid to ease the cutting in different formats and
reference set-square.
Provided with lamp over cutting area.
Fixed blade in painted stainless steel, mounted on a reinforced
cutting plane.
![Brochure Neolt Factory maggio [ENG] Starter 1400 - NAEP](https://naeponline.com/wp-content/uploads/Brochure-Neolt-Factory-maggio-ENG.jpg)
ELECTRO LIGHT POWER TRIM 150/200
Max cutting thickness of 1.2mm
Two reference squares.
Provided with support in steel tubes with
adjustable posts collecting fabric basket.
Options:
- foot pedal

ELECTRO POWER TRIM PLUS 145/165/210/250/300/360
Max cutting thickness of 1.6mm
Collection of trimmings: possibility of horizontal output at
the back or into retrieval tray underneath.
Options:
- Roll holder and fixing bar.
Max cutting thickness of 1.6mm

ELECTRO STRONG TRIM PRO 165/210/260/320
Max cutting thickness of 4.5mm
Cutting up to 15 mm
Size from 1100 mm a 3100 mm
Strong blade holder carriage sliding on bearings
mounted on a rectangular sliding bar.
It comes complete with a movable reference
square, lamp over the cutting area, fluorescent wire
to show the cutting line and sheet holder.
Options:
- Roll holder

EASYCUT 110/165/210/310
Horizontally positioned on the panel or print to be trimmed
Useful cutting light 110-165- 210-310cm. Others on request.
Ergonomic double carriage with the possibility of adjusting the blade depth 15mm max cutting thickness with very high precision ( max possible tolerance 0.2mm/meter)
Anti-slip rubber on the bottom of the bar along the cutting length Round bar for easier handling.
Cutting media: up to 15mm: foam board, cardboard, forex, vinyl and banner Strong and practical for storage; user friendly with an optional pair of suction cups that allow a good fixing to the table.
Double cutting head with interchangeable blade.
Two different blades: the 1 st is a standard double blade perfect to trim rigid materials like Foam and Forex; the 2nd is a double edged hooked blade perfect to cut banners and vinyl.

VERTICAL FIXED BLADE TRIMMERS
SWORD 165/210/250/310
Millimetric base.
Light body frame but strong and reliable.
Quick tools change: with two units always installed and a third optional
Two turnable blades: one moving and one fixed for forex e foam.
Tool for dibond and aluminium cut.
V-cut tool for cardboard angular cut at 60°and 90°
Diamond wheel for glass engraving.
Oversize and strong support base to feed big dimensions panels.
Available in 4 heights: 165, 210, 250 or 310 cm.

SWORD EL 210/250/310
Millimetric base.
Light body frame but strong and reliable.
Quick tools change: with two units always installed and a third optional
Two turnable blades: one moving and one fixed for forex e foam.
Tool for dibond and aluminium cut.
V-cut tool for cardboard angular cut at 60°and 90°
Diamond wheel for glass engraving.
Oversize and strong support base to feed big dimensions panels.
Available in 4 heights: 165, 210, 250 or 310 cm.

SWORD ELs 210/250/310
Millimetric base. Light body frame but strong and reliable. Quick tools change: with two units always installed and a third optional Two turnable blades: one moving and one fixed for forex e foam. Tool for dibond and aluminium cut. V-cut tool for cardboard angular cut at 60°and 90°Diamond wheel for glass engraving. Oversize and strong support base to feed big dimensions panels Available in 3 heights: 210, 250 or 310 cm.